Brandt BFL663ZNX, Instruction Manual

Page: 51 / 68

4
Safety for children and
infirm persons
This appliance is not intended for use
by persons (including
children) with
reduced physical, sensory or mental
capabilities, or a lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning the use of the appliance
by a person responsible for their
safety. Children should be supervised
to ensure that they do not play with
the appliance.
● Keep all packaging away from
children to avoid risk of suffocation.
● Protect children from being scalded
by touching the very hot compressor
at the rear bottom of appliance
● Don't place items on top of the
appliance as this could cause injury
should they fall off.
●Never allow children to play with the
appliance by hanging or standing over
or on the doors, racks, shelves and
drawers etc.
Safety about electricity
To avoid the risks that are
always present when using an electric
appliance, we recommend that you
pay more attention to the instructions
about electricity below.
● Unpack the appliance and check
through the appliance. Should any
damage be evident, don't plug in the
appliance but contact the shop
immediately
from which you
purchased it. Keep all packing
materials in this case.
● We recommend that you wait for 4
hours
before connecting the
appliance to allow the refrigerant to
flow back into the compressor.
● The appliance must be applied with
single phase alternating current of
220~240V/50Hz. If the voltage
fluctuates exceeding the upper limit,
A.C. automatic voltage regulator of
more than 350W should be applied to
the refrigerator for safety use.
● The mains plug must be accessible
when the appliance is installed.
● This appliance must be earthed.
-This appliance is fitted with a fused
plug in accordance with local
standard. The fused plug should be
suitable for use in all houses fitted
with sockets in accordance with
current specifications.
-If the fitted plug is not suitable for
your socket outlets, it should be cut
off and carefully disposed of. To avoid
a possible shock hazard, do not insert
the discarded plug into a socket. If in
doubt contact a qualified registered
electrician.●Don’t use extension cords
or multiple sockets which could cause
overloading of wiring circuits and
could cause a fire.
Always plug your appliance into its
own individual electrical socket which
has a voltage rating that matched the
rating plate.
●Make sure that the plug is not
squashed or damaged. Otherwise, it
may cause short circuit, electric shock
or overheat and even cause a fire.
●Don’t insert the mains plug if the
socket is loose, there is a risk of
electric shock or fire.