Brandt BFC8052SW, Instruction Manual

Page: 51 / 103

The appliance is touching
the wall or other objects
Move the appliance slightly
A component, e.g. a hose,
at the back of the
appliance is touching
another part of the
appliance or the wall
If necessary, carefully bend
the component out of the way
The food not cold enough
The temperature is not
properly set
Please refer to the
temperature control section
The door was left open for
an extended period
Only open the door when
necessary
A large quantity of warm
food was placed in the
appliance within the last
24 hours
Turn the thermostat to a
higher setting temporarily to
cool down the appliance.
The appliance is near a
heat source
Please refer to the installation
location section
The appliance cools too
much
The thermostat is too high
Turn the thermostat to a lower
setting temporarily

Some noises may be heard during normal appliance operation (compressor operating
cycle, automatic defrosting, circulation of the refrigerating gas through the appliance,
etc.).

If you cannot find the cause of the fault,
only call our approved after-sales service or a qualified
professional.