12
16.
Connect electrical connector
①
in
accordance with step 3 and then install
part
②
(which is in the plastic bag).
17.
Reverse part
①
by 180°and install it
onto the right corner of upper door,
then mount part
②
. (both of which are
taken down in step 2)
18.
Take the reed switch out of the coping
block(part
③
6 in step 3) and mount it
on another block for use (marked “R”
in the plastic bag). Place the removed
coping block back into the plastic bag.
Note: Be sure character side of reed
switch fits well with coping block.
19.
Install part
①
connect the wire connector
②
, and then install part
③
.
20.
Open the upper door, mount door racks
and then close it.
Installing your new appliance
Upper hinge cover (left)