22
23
EN
4. OPERATION
Reversing the door
Before reversing the door, please make sure
the appliance is switched off and unplugged
form the mains.
1. Remove the front panel covers (11) and
(13).
2. Remove the screws (1) that hold the front
panel (12).
3. Remove the front panel.
4. Remove the screws (4) that hold the mid-
dle hinge (3).
5. Remove the middle hinge.
6. Lift the upper door (5) off the appliance
and place it on a padded surface to
prevent it from being scratched.
7. Lift the lower door (6) off the appliance
and place it on a padded surface to
prevent it from being scratched.
8. Remove the right front foot (7) and the
screws (8) that hold the lower hinge (9).
9. Remove the lower hinge (9).
10. Remove the left front foot (10) and trans-
fer it to the right side.
Before
After
11. Before fitting the lower hinge, remove the
hinge pin and then rotate the lower hinge
180 degrees.
12. Fit the lower hinge on the left side.
13. Fit the lower door onto the lower hinge.
14. While holding the lower door in the
closed position, assemble the middle
hinge on the left side.
15. Fit the upper door onto the middle
and upper hinge. Fix the middle hinge
with the screws. Make sure the door is
properly aligned on the appliance before
tightening the screws.
16. Fit the front panel using screws.
17. Fit the front panel covers.
