17
2. Press
to select “GENERAL SETUP PAGE”.
TV DISPLAY:
Set the aspect ratio of the DVD Player according to the TV you have
connected.
1. Press
▲▼
repeatedly to highlight TV DISPLAY.
2. Enter its submenu by pressing .
3. Press
▲▼
repeatedly to highlight the selected item.
4. Press
to confirm.
4:3
4:3
4:3
4:3 PANSCAN
PANSCAN
PANSCAN
PANSCAN
→ If you have a normal TV and want both sides of the picture to be
trimmed or formatted to fit your TV screen.
4:3
4:3
4:3
4:3 LLLLETTERBOX
ETTERBOX
ETTERBOX
ETTERBOX
→ If you have a normal TV and select the item, a wide picture with
black bands on the upper and lower portions of the TV screen will be
displayed.
16:9:
16:9:
16:9:
16:9:
Wide screen display
Wide
Wide
Wide
Wide Squeeze
Squeeze
Squeeze
Squeeze
: To set display mode to 4:3.
ANGLE MARK:
It displays current angle setting information on the display, if available
on the disc.
1. Press
▲▼
repeatedly to highlight ANGLE MARK.
2. Enter its submenu by pressing .
3. Press
▲▼
repeatedly to highlight the selected item.
→
On:
On:
On:
On:
Enable Angle Mark.
→
Off:
Off:
Off:
Off:
Disable the current angle setting display.
4. Press
ENTER
ENTER
ENTER
ENTER
to confirm.
OSD LANGUAGE:
You can select your own preferred language settings. This DVD system
will automatically switch to the selected language whenever you load a
disc. If the language selected is not available on the disc, the disc’s
default language will be used instead. The OSD language in the system
menu will remain once selected.
1. Press
▲▼
repeatedly to highlight OSD LANGUAGE.
2. Enter its submenu by pressing .
Downloaded from www.vandenborre.be
