Brandt BC8511NS, Instruction Manual

Page: 29 / 40

your device ").
• Regularly check the door seals and make
sure that they always close effectively. If this
is not the case, please contact service after
sales service.
• Do not let it set at too low a temperature.
• Not fulfilling with drawers, bins and shelves
arrangement could lead to increased energy
consumption.
WARNING:
If the unit was shipped to home in a
horizontal position, place it vertically and
wait two hours before plugging it in. A small
amount of oil may have flowed into the
refrigeration circuit, you need to give it time
to flow back towards the motor before
connecting the appliance, otherwise you
may damage it.
Before any maintenance, disconnect the
power plug. Do not pull the power cable but
directly enter the profile.
CLEANING AND MAINTENANCE

Before cleaning, unplug the appliance
and turn off the power.

Do not clean the appliance with metal
objects, a steam system, volatile oils,
organic solvents or abrasives.

Do not use sharp objects to remove ice.
Use a plastic scraper.
Dusts behind the refrigerator and on
the ground shall be timely cleaned to
improve the cooling effect and energy
saving.
The interior of the refrigerator should
be cleaned regularly to avoid odor.
Check the door gasket regularly to
make sure there are no debris.

To replace the light bulb, if operation is
possible by the user himself, please refer to
the "Maintenance" of this manual. Always be
sure to unplug your appliance before.
WARNING: If the appliance is equipped with
a LED lighting, it can only be replaced by a
qualified technician
.



Please turn off the power before
cleaning, remove all food, shelves,
drawers, etc.
Clean the door gasket with mild soap and
water.
Use a soft cloth or sponge to clean the
inside of the refrigerator, with two
tablespoons of baking soda and a quart of
warm water. Then rinse with water and
wipe clean, and open the door and dry it
naturally before the power is turned on.
For areas that are difficult to clean in the
refrigerator (such as narrow sandwiches,
gaps or corners), it is recommended to
wipe them regularly with a soft rag, soft
brush, etc. and when necessary, combined
with some auxiliary tools (such as thin
sticks) to ensure no contaminant
accumulation in these areas.
Do not use soap, detergent, scrub
powder, spray cleaner, etc., as these may
cause odors in the interior of the
refrigerator.
Clean the bottle frame, shelves and
drawers with a mild detergent and dry with
a soft cloth.
Wipe the outer surface of the refrigerator
with a soft cloth dampened with soapy
water, detergent, etc., and then wipe dry.
Do not use hard brushes, clean steel
balls, wire brushes, abrasives, such as
toothpastes, organic solvents (such as
alcohol, acetone, banana oil, etc.), boiling
water, acid or alkaline items clean
refrigerator considering that this may
damage the fridge surface and interior.
Boiling water and benzene may deform or
damage plastic parts.
Do not rinse with water so as not to
affect the electrical insulation properties.









9