Getting Started
English
- 48 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz.
To switch on the TV from standby mode either:
Press the “ ” button,
P+
/
P-
or a numeric button on
the remote control.
Press the side control button so that the TV comes
on from standby.
To Switch the TV Off
Press the “
“ button on the remote control or press
the side control button until the TV switches to standby
mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note
: When the TV is in standby mode, the standby LED can
blink to indicate that features such as Standby Search, Over
Air Download or Timer is active. The LED can also blink when
you switch on the TV from standby mode.
First Time Installation
IMPORTANT:
When you select Country option as
France or Italy, you will be asked to set and confirm
a PIN number. Selected PIN number cannot be 0000.
Enter a PIN number and confirm it by entering once
more. Press OK button to continue. If the two PIN
numbers match, your master PIN number will be set.
Note:
you are advised to write down this code on your
instruction manual so that you can remember it when
you need to use it.
WARNING:
When you are required to enter a PIN
number for any menu operation you should use the
PIN that you have previously defined during the first
time installation. If you have forgotten the PIN number
you have set during the first time installation, you
should use the master PIN code, 4725.
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK.
The First Time Installation (FTI) screen will be displayed
next. Set your preferences using the navigation buttons
and when finished, press OK to continue.
You can activate
Store mode
option to be available
in “Other settings” menu and your TV’s features will
be illustrated on the top of the screen. A confirmation
screen will be displayed. Select
YES
to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press
OK
button to continue.
Demo Mode
If you want to use your television at home, you are
advised to select the Home mode.
If you choose the Store mode, you will have to confirm
your choice by pressing the OK button on the remote
control.
Default PIN code can change depending on the
selected country.
If you are asked to enter a PIN code for viewing a
menu option, use one of the following codes:
4725
,
0000
or
1234
.
Aerial Installation
If you select
AERIAL
option from the
Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
NOTE
: You can press
MENU
button to cancel.
Once all available channels have been saved, the
Channel List will be displayed on the screen. If you
would like the channels to be sorted according to
the LCN (*), please select “Yes” and then press OK.
Press
MENU
button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).
Cable Installation
If you select
CABLE
option and press
OK
button
on the remote control, you can set the frequencies
manually. To continue, please select
YES
and press
OK
. To cancel operation, select NO and press
OK
.
Enter the frequency range manually by using the
numeric buttons.
Note
: Searching duration will change depending on the
selected search step.
Media Playback via USB Input
You can connect a 2.5” and 3.5” inch (hdd with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB input of the TV.
IMPORTANT!
Back up your files before making
any connections to the TV. Manufacturer will not be
responsible for any file damage or data loss. Certain
types of USB devices (e.g. MP3 Players) or USB hard
disk drives/memory sticks may not be compatible
with this TV. The TV supports FAT32 and NTFS disk
formatting but
recording will not be available with
NTFS formatted disks.
First Time Installation - USB Connections
Downloaded from www.vandenborre.be
