Brandt AD9905B, User Manual

Page: 10 / 12

1
2

Electrical Connection
Before completing any connection, make sure the house voltage corresponds
with the voltage indicated on the label affixed inside the hood.
Only a licensed professional may connect and install appliances. Damage
caused by improper installation is not covered under warranty.

Appliance fitted with plug
Connect it to a socket which conforms with current regulations. If you intend to
connect it directly to the electric mains, remove the plug and fit an approved
bipolar switch with a minimum contact opening of not less than 3mm.

Appliance without plug
Fit an approved plug or a bipolar switch with a minimum contact opening of
no less than 3mm.
Direct connection installations must be handled by licensed professionals.
Brandt Asie Pte Ltd is not liable for damages caused by improper handling
and installation of the appliance.
7

Installation
Safety precautions:
Do not install the cooker hood where there are many doors or windows in order
to avoid affecting the exhaust efficiency of the hood caused by air flow.
Install the cooker hood right above the hob. The recommended distance
between the hob and the lower edge of the cooker hood is minimum 650mm
and maximum 750mm.
In order to get the optimum performance, do not elongate the exhaust pipe too
long, and try to make the bend of exhaust pipe less.
Ensure
the connection
After hanging the unit on the wall, ensure the hood is level and vertical.
The air outlet must not be connected to chimney flues or combustion gas ducts.
The air outlet must under no circumstances be connected to ventilation ducts
for room in which fuel-burning appliances are installed.
Installation diagram
is airproof.