Brandson 301518/20150925FZ003, User Manual

Page: 17 / 48

17
English
Make the following settings one after the other:
1. Year
2. Month
3. Day
4. Language (EN= English, GE= German, FR= French, IT= Italian,
ES= Spanish, NE= Dutch, DA= Danish, RU= Russian)
5. 12/24 Hours
6. Hours
7. Minutes
8. Either air pressure (left) or temperature (right) for the last 12 hours
9 Set alarm
Press the "ALM" button to display the currently set alarm times. The alarms are
displayed in the following cycle: Alarm 1 -> Alarm 2 -> Standard mode
Press and hold the "ALM” button on the rear side of the device and select an
alarm (Alarm 1 or Alarm 2). Press and hold the "ALM" button for about 3 seconds
to set the desired alarm time. You can configure the time as desired using the
"UP" and "DOWN" buttons. Press the “ALM” button again to confirm the input.
As soon as the alarm time is reached, the alarm beeps as follows:
● 1-10 seconds: 1 "Beep" per second
● 11-20 seconds: 2 "Beeps" per second
● 21-30 seconds: 3 "Beeps" per second
● 30-120 seconds: continuous beeping
When the alarm beeps and you press the "SNZ” button, the alarm function
switches to the “Snooze mode". The alarm rings once again after 5 minutes. You
can activate the respective alarm using the “UP” button.
10 Set snooze mode
This device allows you to configure the snooze mode for any duration between
5 and 30 minutes. Press and hold the "SNZ" button for about 3 seconds. You can
select any value between 5 and 30 minutes using the "UP" and "DOWN" buttons.
Confirm your entry by pressing the "SNZ" button.