25
English
•
To start the appliance, press the "
" button on the control panel. The fan
heater now starts to emit cold air.
•
Press the "
" button to adjust the desired temperature. The heater will
start heating if the set temperature is higher than the room temperature. If
the current temperature is higher than the set temperature, the appliance
only starts heating if the temperature falls below the set value.
•
The symbol of the heat setting display (9) starts glowing. The fan heater has
2 heat settings. Heat setting 2 is active if two "
" symbols are displayed.
•
As an alternative to setting the temperature, you can directly press the heat
setting button "
" and the fan heater heats continuously and does not
stop when a certain temperature is reached.
•
You can also manually set whether you want to activate heat setting 2 or
heat setting 1. Press the "
" symbol on the control panel.
6. Timer function
You can enable the timer function by pressing the "
" button. The currently
configured time setting is displayed. You can select between 1 to 7 hours in incre
ments of 1 hour. Please refer to the following table for the respective steps and
the corresponding illuminated LEDs.
Timer LEDs
Timer time
none
Timer switched off
1 h
Timer 1 hour
2 h
Timer 2 hours
1 h + 2 h
Timer 3 hours
4 h
Timer 4 hours
4 h + 1 h
Timer 5 hours
4 h + 2 h
Timer 6 hours
4 h + 2 h+ 1 h
Timer 7 hours
