13
English
Note: For remote controls with fixed code and learning code, the duplicator works
after duplication.
However, for the rolling code make mentioned above, follow the original user
manual to program the duplicator after duplicating it on the receiver.
10. Replacing the battery
Press the battery compartment unlock button using a sharp object and slide the
battery compartment open. Remove the empty batteries and replace them with
two new CR2016 batteries. Always pay attention to the correct polarity of the
batteries. (+ polarity in the direction of the latch/ battery compartment cover)
11. Safety instructions and disclaimer
Never try to open the device to carry out repairs or modifications. Avoid contact
with the mains voltage. Do not short-circuit the product. The device is not approved
for outdoor use. Therefore please use it only in dry surroundings. Protect it from
high humidity, water and snow. Keep the device away from high temperatures.
Do not expose the device to sudden changes in temperature or heavy vibrations,
as this could damage the electronic components. Check the device for damage
before using it. The device should not be used if it was subject to impact or has
been damaged in some other manner. Please comply with the local regulations
and restrictions.
Do not use the device for purposes other than those described in the user manual.
This product is not a toy. Keep it out of the reach of children or mentally disabled
persons. Any repair or modification to the device, which is not carried out by the
original supplier, will void the warranty or warranty claims. The device should only
be used by those who have read and understood this manual. The specifications of
the device may be changed without any special prior notification.
12. Disposal instructions
In line with the European WEEE directive, electrical and electronic devices should
not be disposed of along with domestic waste. Their components have to be sent
separately for recycling or disposal, as improper disposal of toxic and dangerous