INSTALLATION INSTRUCTIONS
Speaker and on/off switch.
Front camera with foot mount.
Troubleshooting/FAQ’s
- My curb alert is no longer giving me
audible alerts.
Try holding the red calibration button down for
35-40 seconds. This will not give you any
audible alert but it will hard reset the system.
Afterward, start recalibration at step 1 on the
top of page 3.
- I can only get my system to alert me
when the box is almost against the
sensor.
Place the box as close as it needs to be in
order to trigger the sensor. Once you’ve
accomplished that, move the box back in 3-4
inch increments. Hit the calibration and
recheck distance each time you move to box
back. Do this until you’ve reached your desired
alert distance
- Does the orientation of the sensor
matter?
No. The sensor can be in any orientation. The
most important factor in regards to accuracy is
the calibration and making sure there is
nothing that will impede the view of the
sensor.
- If I remove the battery in my vehicle for
replacement will I have to recalibrate?
No. Your calibration is actually saved within the
sensor head. Removing the battery will not
delete the calibration
5000-CA6 rev2 Instructions 3-1-19
Page 5 of 5
