INSTALLATION INSTRUCTIONS
9002-8808.docx
Page 5 of 6
JM
Step 21:
Remove glove box for access and run Chassis
Harness toward center of dash.
Step 22:
Using a plastic trim removal tool, remove
HVAC panel.
Step 23:
Connecting Power harness.
Splice Red power wire to Blue/Red wire on back of
power point and Splice Black Ground to Black/White
wire. RECOMMENDED: Use solder and cover with heat
shrink tubing or use T-taps as an alternate connection
method.
Step 24:
Connect Chassis Harness to RCA Harness.
Step 25:
Plug the Chassis Harness RCA connector into
your aftermarket display.
Step 26:
Reinstall your spare tire onto the tire carrier,
but do not mount with lock down bar.
Step 27:
Put the supplied camera mount on to the
factory tire hold down piece.
