INSTALLATION INSTRUCTIONS
Page 2 of 5
GS
1. Remove the inner door panel to gain access
to the wiring and side view mirror mounting
bolts.
2. Use the foam gasket and attach it to the
bottom of the mirror plastic. Attach it so the
flat area aims towards the rear of the
vehicle.
3. Carefully remove the mirror glass from the
mirror.
Each vehicle is different; consult the
vehicle’s service guide for how-to steps.
4. Remove the mirror from the vehicle housing
from the vehicle.
5. Drill 2 pilot holes for the mounting screws
and a pilot hole in the center of the camera
pod opening for the harness to be ran
through.
6. Mount pods by screwing from the inside of the
mirror.
Using a Phillips number 1 tip with a ¼
wrench works the best.
7. Run the camera harness into the mirror and
through the arm of the mirror, into the door.
8. Run the camera harness into the vehicle
through the door boot.
9. Connect the video/power harness to the chassis
harness that was just ran into the vehicle.
