INSTALLATION INSTRUCTIONS
9002-2775 v2 Instructions 7-28-16
Page 3 of 4
JM
16.
Connect the back up camera RCA to
the yellow RCA labeled REAR CAM
on the power harness.
17.
Connect the front or blind spot
camera RCA to the yellow RCA
labeled FRONT/BSD CAM on the
power harness.
18.
Connect the power for the camera to
an accessory wire that is +12 volts
anytime the key is turned on.
19.
Adjust the DIP switches using the
guide at the end of these
instructions for vehicle type and
options. Disconnect power plug from
interface, then plug back in and test
by placing vehicle in reverse.
