INSTALLATION INSTRUCTIONS
9002-2750v1.doc instructions V1 7-12-16
Page 1 of 5
JM
MyFord Factory Display Radio Camera Interface
For 4.2” Display
(Kit # 9002-2750v1)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Tools & Supplies Needed:
Video input T-harness
Interface box
Instructions
Plastic trim removal tool
7 mm socket
Phillips screw driver
Wire strippers
Wire cutters
Electrical tape or Heat shrink
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit
www.brandmotion.com
