LTE Outdoor CPE
EN-42
3.
To configure the settings, do the following:
Application
Application
: Enter a rule name.
Protocol
: Select the trigger port protocol from the drop-down list.
Triggered Range
: Enter the start-port and end-port that will trigger
the device to open ports for incoming data
.
Forwarded Range
: Enter the start-port and end-port used by the
public port from the WAN side.
Port Range Trigger
Enabled/Disabled
: Select
Enable
from the drop-down list to enable
firewall.
4.
Click
APPLY
to save the configuration rules.
Enable UPnP
Universal Plug and Play (UPnP) allows automatic discovery and control of
services available on the network from other devices without user intervention.
1.
Click
Advanced Mode
tab and select
NAT
.
2.
Click
UPnP
.
3.
On
UPnP
, select
Enable
from the drop-down list to enable the UPnP feature.
4.
Click
APPLY
to save changes.
Configure DMZ
A DMZ (Demilitarized Zone) sets a single computer, called a DMZ host, on your
network to receive unrestricted incoming traffic from the Internet.
1.
Click
Advanced Mode
tab and select
NAT
.
2.
Click
DMZ
.
