LTE Outdoor CPE
EN-36
3.
On
Enable Syslog
, do the following:
Enable Syslog
: Click
Enable
to enable the system log.
Syslog IP
: Specify the IP address of the server that will receive the
system log.
4.
Click
APPLY
to save changes.
View System Log
View the current system log entries.
1.
Click
Advanced Mode
tab and select
Admin
.
2.
Click
Diagnosis
.
3.
On
System Log
, it displays the current system log entries.
Click
REFRESH
to refresh the log shown on the screen.
Click
CLEAR
to clear the current system log data.
Use Ping Test
Allow the CPE to ping the network devices to verify their connection.
1.
Click
Advanced Mode
tab and select
Admin
.
2.
Click
Diagnosis
.
3.
On
Ping test
, do the following:
IP or Address
: Enter the IP address of the network device that you want
to ping.
Packet size
: Enter the packet size.
Number of Pings
: Enter the number of pings.
4.
Click
APPLY
to ping other network device.
Use Traceroute Test
Allow the CPE to trace the route that test packets take from one web destination
to another. This function is commonly used to troubleshoot network problems
and identify routing problems or firewalls that may be blocking access to a web
site.
1.
Click
Advanced Mode
tab and select
Admin
.
2.
Click
Diagnosis
.
3.
On
Traceroute test
, enter the IP or the domain name on
IP or Address
.
4.
Click
APPLY
to monitor a network trace.
