English
instruction manual
5
WEIGHTING STEP
Under the state press the key of “ON/OFF” to power on, the scale will be zero “0.00” appear on the display
after 3 seconds.
Under the weight state, put the container on the bowl, LCD will show the weight of container.
Press the key of “TARE”, LCD shows zero. Clear the weight of the container, then put the food into bowl, the
weight will appear on the display. Press the key of “ON/OFF” again , power off.
ERROR DISPLAY INTRODUCTION
When the scale is over loaded, the “EEEE” will appear on the display.
When the screen shows “ LO ”, it means that the power isn’t enough, please change the batteries as soon
as possible.
INTRODUCTION OF USING AND INSTALLING THE BATTERY
Use 2PCS CR2032 batteries.
When change the battery, please open the battery cover on the back, put the battery in the battery case
(make the positive poles towards), then close the battery cover tight.
ADVICE FOR USE AND CARE
Put the scale on a clean and flat table. The max. weight of the scale is 5000g, which included the weight
before tare. To ensure the life of the scale, do not put the scale under wet, hot & cold condition.
The product belongs to high precision electronic weighing apparatus, please do not press or drop the scale
otherwise the scale is easy to damage. If the scale surface is dirty, please clean the scale with soft cloth, do
not use any chemical detergent and allow water to get inside the scale.
The product is for small goods weighing only, do not use for legal trade. If the result appears improperly,
please check about whether the batteries and the touching point contact well. Replace for new batteries
if used for a long time already, then try again. If necessary, contact the local franchisers or telephone com-
pany.
Summary of Contents for 55577
Page 14: ...14...
