ASSEMBLY INSTRUCTIONS
1) Unscrew the Propane injectors out in the anti-clockwise direction.
2) Put the Propane injectors in a safe place.
The injector is a 2 step unit. Remove the
Propane injector and the NG injector is already there and ready for use.
Note: when unscrew and screw on the injectors from or onto the valve carefully and
dont overpressure.
Please use a 6mm nut driver to operate (Tool is NOT included).
Step 3
Step 4
1) Insert back all burner as in Figure 6 and 7.
2) Secure all burner with the R Pin as in Figure 8 and 9.
Figure 6
Figure 7
Figure 8
Figure 9
