background image

IM-117     Outdoor Burner/Hearth Kits • 12/08

1

Models:

DG-SS-18/24/30NG 

 

 

 

AGL-SS-18/24 NG 

 

 

 

H-SS-24NG  

 

 

 

 

HM2-SS-24NG 

Installation

 Instructions

Check with your local building code agency before you begin installation to ensure compliance with local codes, including 

the need for permits and follow-up inspections. If you encounter any problems regarding code approvals, or if you need clar-

ification of any of the instructions contained here, contact the Technical Services Dept., 919.331.0078 or 919.331.0079.

DO NOT DISCARD THIS MANUAL

CAUTION

•  Important  operating 

a n d   m a i n t e n a n c e 

instructions included.

• 

Leave this manual with 

party  responsible  for 

use and operation.

• 

Read,  understand 

and  follow  these 

instructions  for  safe 

i n s t a l l a t i o n   a n d 

operation.

DO

NO

T

DIS

CA

RD

If the information in these instruc-

tions is not followed exactly, a 

fire may result causing property 

damage, personal injury, or death.

 

•  Do not store or use gasoline or other flam-

mable vapors and liquids in the vicinity of 

this or any other appliance.

•  What to do if you smell gas:

-  Do not try to light any appliance.

-  Do not touch any electrical switch. Do not 

use any phone in your building.

-  Immediately call your gas supplier from 

a  neighbor’s  phone.  Follow  the  gas 

supplier’s instructions.

-  If you cannot reach your gas supplier, call 

the fire department.

•  Installation and service must be performed 

by a qualified installer, service agency, or 

the gas supplier.

WARNING

HOT! DO NOT TOUCH

SEVERE BURNS MAY RESULT.

CLOTHING IGNITION MAY RESULT.

WARNING

•  Keep children away.  

•  CAREFULLY SUPERVISE children in same room as 

appliance.

•  Alert  children  and  adults  to  hazards  of  high 

temperatures.

•  Keep  clothing,  furniture,  draperies  and  other 

combustibles away. 

Glass  and  other  surfaces  are  hot  during 

operation and cool down.

Installation  and  service  of  this 

appliance should be performed by 

qualified personnel.It is suggested 

NFI  certified  or  factory-trained 

professionals,  or  technicians 

supervised  by  an 

NFI certified profes-

sional.

In the Commonwealth of Massachusetts:

•  This appliance must be installed by a licensed plumber 

or gas fitter.

•  The chimney flue damper, when used with gas logs, will 

be welded open or completely removed.

•  A CO detector shall be installed in the room where the 

appliance is installed.

HEATMASTER, LLC

AMERICAN GAS LOG

Outdoor Burner/Hearth Kits   

 

For use use with Natural gas only

Summary of Contents for AGL-SS-24NG
















Reviews: