background image

23

18. Storage / Care

i.  Disconnect tether system from structure and 

store back on ladder, tensioning tethers so 
ropes are not loose.

ii.  Remove the life-line rope using the release 

lever to remove any tension in the rope and 
store rope in provided rope bag.

iii.  Attach rope bag to ladder or store in vehicle.
iv.  It is recommended that Ladders be stored away 

from direct sunlight, excessive heat, dampness 
or exposure to the elements.

v.  Store the ladder in a safe place where it cannot 

be damaged by vehicles, heavy objects or 
contaminants.

vi.  Store the ladder so it does not become a trip 

hazard or obstruction.

vii.  Store the ladder securely so that it cannot fall 

and injure people.

viii. When storing ladders give consideration 

for preventing use by criminals for gaining 
unauthorised access and ensure children and 
the general public cannot climb the ladder.

ix.  Repairs and maintenance shall be carried 

out by a competent person who has been 
qualified by Branach and shall be in 
accordance with Branach’s instructions 

and procedures. Only use Branach 
recommended components and fasteners.

Summary of Contents for FEU 3.9

























Reviews: