SR-28 User Manual
IZ`^,
Page 2
SR-28 User Manual
-'-'IHP>K
To turn the unit on, tap the [
POWER
] button. There will be a small delay before
the unit actually turns on.
To turn the unit off, hold the [
POWER
] button for about 2 seconds.
Pa^gma^LK&+1blmnkg^]hg%ma^Ihp^k:Zg](hkIhp^k;E>=leb`amnimh
indicate that power is present at the corresponding connector. When the SR-28
blh__%ma^l^E>=llmZrh__%^o^gpbmaihp^kik^l^gmZmma^\hgg^\mhk'
REDUNDANCY
: The SR-28 has 2 power inputs and allows for 2 separate power
supplies to be connected simultaneously. If one of the supplies fails, the second
one will keep the SR-28 running. The LED corresponding to the faulty supply will
start blinking to alert you. You can then replace it without having to power down.
Note: For better failure protection, the 2 power supplies should be on separate
mains circuits.
5. Reshaping and distributing time code
.'*'MBF><H=>=BLMKB;NMBHG
Simply multing a time code source to multiple destinations can cause serious
problems and is not recommended. The SR-28 eliminates these potential
problems by providing 8 individually buffered and balanced outputs.
.'+'K>LA:IBG@=BLMHKM>=MBF><H=>
Hghe]^kZgZeh`mZi^fZ\abg^l!^li^\bZeerOMKl"%mbf^\h]^nlnZeeraZl
improper rise/fall times, leading edge peaking and different amplitude levels
hghg^lZg]s^khl'Pbmafhk^fh]^kg^jnbif^gm%ma^lb`gZeblnlnZeer
cleaner but can also get distorted by long cable runs and poor connections.
As a result, time code can become unreadable. The SR-28 eliminates these
amplitude distortions by reshaping the code to its original specifications.
.','MBF><H=>E>O>E
Level fluctuations or improper level can also render time code unreadable.
Pbmama^LK&+1%^Z\ahnminmblbg]bob]nZeerZ]cnlmZ[e^lhmaZmhimbfnfe^o^el
can be sent to each reader. These levels remain constant regardless of input
fluctuations.
.'-'L>E><MBG@MA>IKHI>KKBL>MBF>
Kbl^mbf^ebfbmbg`pZlli^\b_b^]bgLFIM>Zg]>;Nmhfbgbfbs^\khllmZed_khf
time code into audio. A longer rise time removes more high frequency compo-
,'B(Hl=^l\kbimbhgZg]<Z[e^K^jnbk^f^gml
,'*IHP>K
Ma^LK&+1k^jnbk^l*+O=<%*:':\\^imZ[e^kZg`^bl*+O=<$(&*.'
The external supply provided with the SR-28
Z\\^iml*))mh+-)O:<bginmZm
.)&/)AslhbmbllnbmZ[e^_hknl^Zgrpa^k^bgma^phke]'
HimbhgZeer%Zl^\hg]ihp^klniier\Zg[^\hgg^\m^]mhIhp^kBginm;_hk
k^]ng]Zg\r!l^^-'-[^ehp"'Mhhk]^kZl^\hg]ihp^klniier!i(g3IL&0"
contact your dealer.
➢
Bgl^kmma^-ibgien`bgmhma^k^ZkiZg^ecZ\dZg]l^\nk^[rl\k^pbg`ma^kbg`'
Plug the supply into the wall outlet using the standard IEC cable supplied.
,'+MBF><H=>BGINML
:\\^imlZgrmbf^\h]^_hkfZmZmli^^]lkZg`bg`_khf*(,)qmh/)qieZrli^^]'
Connectors: XLR female
➢
Use a standard audio cable, Pin #2 Hot. Balanced or unbalanced systems.
,',MBF><H=>HNMINML
<hgg^\mhk3+.ibg=?^fZe^!L^^:ii^g]bq<_hkpbkbg`]bZ`kZf"
➢
Nl^lmZg]Zk]MZl\Zf(:ob]!=b`b]^lb`g"ZgZeh`Zn]bhibghnm\hg_b`nkZmbhg
and if needed, a readily available DB-25 male to 8 XLR male break-out cable
from third party companies.
4.
?khgmIZg^eLpbm\a^lE>=L
-'*'BGINMLB@G:EE>=L
Ma^l^+E>=Lbg]b\Zm^maZmZlb`gZeblik^l^gmZmma^\hkk^lihg]bg`bginm'
-'+'BGINML>E><MHKE>=L
Tap the [
SELECTOR
] button to toggle between the 2 inputs
'Hg^h_ma^+E>=leb`aml
up to indicate which input is currently selected. If necessary, an external selector switch
\Zg[^nl^]!l^^Zii^g]bq;"
-','HNMINME>O>EL
Ma^e^o^e_hk^Z\ah_ma^1hnminmlblZ]cnlmZ[e^obZ1_khgmiZg^eihml
. Levels go
_khf_neeh__mh$*+]['
