SR-28 User Manual
Page 1
1. Introduction
Congratulations on purchasing the SR-28 Time Code Distributor. The SR-28 is a high
quality reshaper designed to recondition very low level or amplitude distorted time
code into a properly shaped waveform and to distribute it through its 8 individually
[n__^k^]hnminml'>Z\ahnminmaZlbmlhpge^o^eZ]clnmihm'
There are 2 separate time code inputs that can be selected via a front panel switch
or, alternatively via an external remote switch. Two separate power supplies can be
connected into the SR-28 for redundancy.
2. Installation
2.1. UNPACKING
When unpacking your SR-28 the following items should be in the shipping carton:
LK&+1ngbm
Ngbo^klZeIhp^kLniier!*+O=<%*',:"
B><ihp^k\Z[e^
Hpg^klFZgnZeK^`blmkZmbhg\Zk]
2.2. INSTALLING THE SR-28
The SR-28 is designed to be mounted in a standard 19” rack. It is 1U in height.
Usual precautions should be respected when wiring the SR-28: use high quality
cables with good shield to guarantee a good signal transmission. Keep your
cables as short as possible.
To preserve the integrity of the transmission line, it is recommended that you do
ghmfnemZlbg`e^hnminmmhfnembie^]^ob\^lZlbm\Zg]^`kZ]^lb`gZejnZebmr'
