background image

DCD-8 User Manual

Page 27

Page 26

DCD-8 User Manual

18.5. WORD CLOCK PHASE ALIGNMENT TO VIDEO

Whenever mathematically possible, the DCD-8 will achieve accurate alignment between the 

vertical sync of the incoming video and the rising edge of the output wordclock. Accuracy is 

per the original AES requirement of 5% of the sample clock period. This phase adjustment 

begins immediately after intial lock has been achieved. Please allow up to 30 seconds for 

this state to be realized.
The table below indicates when alignment will occur between the input video “reference 

point” (vertical sync) and the output wordclock rising edge.

Video Input Types and Rates

PAL

Slow PAL

24

NTSC

Slow PAL

23.976

HD 30

HD 60

HD 25

HD 50

HD 24

HD 29.97

HD 59.94

HD 23.976

30.000

25.000

24.000

29.970

23.976

DCD-8 

Domain A

WC

Output

Rates

32000.000

Y

42293.706
42336.000
44055.944

Y

44100.000

Y

Y

44144.100
45937.500
45983.438
46033.966
46080.000
47952.048

Y

Y

48000.000

Y

Y

Y

Y

48048.000
50000.000
50050.000

NOTES: All outputs are rate locked at all times.

18.6. VIDEO INPUT FORMATS

The following table lists all the video formats recognized by the DCD-8 as reference:

 

525i/29.97 NTSC

 

625i/25 PAL

 

720p/50

 

720p/59.94

 

720p/60

 

1080i/25

 

1080i/25  295M

 

1080i/29.97

 

1080i/30

 

1080sF/23.976

 

1080sF/24

 

1080sF/25

 

1080sF/29.97

 

1080sF/30

 

1080p/23.976

 

1080p/24

 

1080p/25

 

1080p/29.97

 

1080p/30

 

1080p/50

 

1080p/50   295M

 

1080p/59.94

 

1080p/60 

Not supported are the low frame rate 720p formats.

18.7. FACTORY DEFAULT SETTINGS

The following are the factory default settings.  These can be recalled in menu 92.

Rate A

48000 Hz (SET)

REF A

Internal (LEARN)

ALT REF A

Off

WCLK OUT

All outputs on A

AUDIO OUT

All outputs on A.Mute

AUDIO IN A

Off

AUDIO IN B

Off

RATE B

48000 Hz (SET)

REF B

Use Ref A

Optical I/O

ADAT

AES Input Default Clock Source

Auto

Video Option

Enable SD only (if VSG-4 is installed)

Menu Lockout

Off

19. Optional cards for the DCD-8

The DCD-8 has provisions for an optional card with 4 BNC connectors. Installation is very 

simple and can be performed on site by a qualified technician

19.1. VSG-4 VIDEO SYNC GENERATOR (HD & SD)

The VSG-4 can operate as a master video sync generator or gen-locked to any of the DCD-8 

references. Up to 4 rates can be generated simultaneously, 2 HD and 2 SD.

19.2. CX-4 WORD CLOCK EXPANSION

The CX-4 provides 4 additional word clock outputs via its 4 BNC connectors. These 2 addi-

tional pairs (outputs 9 - 12) are identical to output pair 7 & 8.

For more information on those and other new option cards, please check our web site.

OPTION CARD

Summary of Contents for DCD-8

















Reviews: