BrainLight FLOAT, Safety Instructions

Page: 22 / 26

Plug in the power cord and then turn on the power switch on the right side of the backrest. Decide between the
automatic massage programs and the manual massage functions.
Automatic Programs:
The automatic programmes I-V work along the whole body using an acupressure point detection system. These points
are strategically massaged to achieve the maximum effect of the massage. If you activate the AUTO buttons, the chair
will automatically adjust the sitting angle. Using the following buttons, you can adjust the sitting and recline position so
that it is most comfortable for you: FOOTREST, RECLINE, FLOAT, FOOTREST EXTENSION.
1. Please take note that with the following AUTO programs, the massage begins after the chair has set the sitting angle:
I ENERGY, II LUMBAR STRETCH, III DEEP TISSUE, IV QUICK, V NECK RELAX, ARM STRETCH, LEG STRETCH,
WHOLE BODY STRETCH and WAIST PRESSURE.
2. With the AUTO buttons SHOULDERS/NECK, BACK and WAIST, you can select an automatic massage program for
the respective body region. Here, you can additonally switch on the AUTO AIR PRESSURE functions, or choose these
separately.
Manual Massage Functions:
1. Press the TIME button to set the desired duration for the massage.
2. Using the respective buttons, select the desired type of massage: KNEADING
, KNEADING , KNEADING
& TAPPING, FLAPPING, KNOCKING or TAPPING.
3. Adjust the WIDTH, SPEED, HEAT, REGION and 3D-INTENSITY according to your wish with the respective buttons.
4. The air pressure functions (AUTO AIR PRESSURE, WAIST, ARM, SEAT, FOOT, ARM/WAIST, WAIST/SEAT, FOOT/
ARM, SEAT/FOOT) can be added, or selected separately.
General Instructions for Use
22