System User Guide Rev. 1.6, Planning & Transfer Systems
19
BEFORE YOU BEGIN
2.2.3
Handling Malfunctions
System Damage or
Failure
Do not continue to use the system if:
• The power cable or plug is damaged or frayed
• Liquid has been spilled into computer
• An object has fallen into computer
• The system does not operate normally when operating instructions are followed
• The computer has been dropped or the cover has been damaged
• System components exhibit a distinct decrease in performance, indicating need for servicing
• Liquids leak from the system
• Smoke is emitted by the system
Using the system when one of the above listed conditions exists may result in person-
al injury or damage to the system.
How to Respond to
Damage or Failure
Steps
1.
Turn off system.
2.
Unplug system from wall outlet.
3.
Contact Brainlab support.
Summary of Contents for IPLAN NET SERVER
