④
Figure 3
When using the
Buzz In-Wall
setup (only), you can use the Digital OR Computer For Barco
Integration
④
. It must always be placed in a non-medical, technical room outside the OR/patient
environment.
All connections between the computer and
Buzz
2 components in the operating room are
galvanically separated.
Buzz In-Wall or On-Wall with Additional Touch Display
The
Buzz In-Wall
or
Buzz On-Wall
can optionally be installed with up to four touch displays (main
touch display and up to three additional touch displays).
①
Figure 4
No.
Component
①
Additional touch display
NOTE: The Buzz In-Wall variant is shown in this example.
NOTE: Depending on your configuration, additional touch displays may be connected to the
computer via optical transfer lines.
Terminology
Unless otherwise specified, all variations of the system are referred to as
Buzz
in this user guide.
Related Links
How to Turn Buzz On on page 32
How to Turn Buzz Off on page 32
How to Turn Additional Touch Displays On on page 33
How to Turn Additional Touch Displays Off on page 33
Touch Display Interaction on page 36
SYSTEM OVERVIEW
System and Technical User Guide Rev. 1.2 Buzz Ver. 2.0
23
Summary of Contents for Buzz 2.0
