PCI LPT & RS232
Software Guide
Chapter 3 Page 25
To add a COM port:
Click on the add button and a Window similar to the following will be
displayed:
In Standard Settings:
In the COM Base field, enter the value 0140.
Note: COM ports are defined with an i/o address range, which in this
case, begins at 0140 and all subsequent ports have an i/o address that is
8 higher than the previous. i.e. if COM2 has an address of 0140h, then
COM3 has an address of 0148h.
In the IRQ field, enter the value 11.
Note: The values used in the above section were those returned by the
BBCARDS program, as described in the above section.
