V4.0119
•
Content Subject to Change
14
M
ACHINE
S
ETUP
U
NCRATING
M
ACHINE
Perform the following steps to uncrate the machine:
1. Check the packing crate and immediately report
any damage to the carrier.
2. Remove the top and side walls from the pallet.
3. Check the contents of the crate to ensure all
items are included.
4. Place the top board on the edge of the pallet by
the rear of the machine.
5. Make sure that the scrub brush and squeegee
assemblies are securely attached.
6. Lift the operator seat and prop open to expose
the battery compartment.
7. Remove the tape from the two red battery
connectors and attach together.
8. Lower the operator seat.
9. Sit on the operator seat, insert the ignition key
and turn to the right (clockwise) to turn on the
machine.
10. Make sure the scrub brush and squeegee
assemblies are raised.
11. Press the down arrow of the directional switch.
12. Slowly drive the machine backwards off the ramp
and onto the fl oor.
