BRAILLO
l
B 300 S2.1
9
92 cm
67 cm
66 cm
2. INSTALLATION
Table:
The printer should be placed on a sturdy table. Please note that this printer weighs 105 kg.
Space:
The minimum space required for the Braillo 300 S2.1 is approximately 1.25m x 1.5m (4 x 5 feet). How-
ever, it will be more space required both behind and around the printer so that one can easily replace
the boxes of paper and perform regular maintenance without moving the printer.
Environment:
Braillo printers are made to operate continuously and to be reliable for many years. However, sensi
-
tive electronic and mechanical parts require a suitable installation environment to ensure long and
trouble-free operation. Temperature should be between 15° - 30° C (60° - 86° F), and relative humidity
between 40 and 60%.
Maintain a clean environment because dust may clog the printer - especially when combined with
high humidity! Too low humidity should also be avoided to prevent electrostatic problems.
Some paper qualities may generate excessive paper dust. This should be removed with a vacuum
cleaner and a damp cloth. (About every 50,000 sheets).
Electrical:
Single phase 230 volt (+/- 10%), 50/60 Hz, circuit breakers should be min. 6 amps.
Be sure to consult your distributor/supplier for further details concerning the installation site.
Failure to meet the installation requirements may relieve the supplier of any warranty responsibilities.
Summary of Contents for 300 S2.1
