SDI-MS16 Video Switcher
Operating manual
3
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
T +49 (0)2244 930-0
F +49 (0)2244 930-450
www.braehler-systems.com
07.3786 191004 V1.01 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Sample connection diagram
Connections
Connections
Connections
Connections
Make sure you have a suitable power supply. Connect the video switcher to a power source.
Connect the desired number of cameras to the video switcher (IN) using the 75 Ohm SDI cable -
camera 1 to input 1, camera 2 to input 2, and so on. Connect your monitor to one of the OUT
outputs (e.g. OUT8) and connect the video switcher to a computer using the brählerOS or
CamControl2 software via a network cable.
The brählerOS software typically expects the video output on OUT8 port.
The CamControl2 software can be configured to any of the outputs, e.g. OUT16.
