43
Transfer Printer THT-BP Precision
7. Media Loading
22
23 13
24
19
20
21
18
17
16
Fig. 7f Loading Labels from Roll in Peel-off mode
12. For peel-off mode swing the locking system (
18
) away from the rewind
assist roller (
20
).
13. Remove all labels from the media strip hangig out of the printer. Then,
slide the strip (
22
) around the dispense plate (
16
) to the internal rewind
hub (
13
) as shown in figure 7f. Slide the strip under the clamps (
23
) that
are located on the internal rewind hub (
13
). Hold the internal rewind hub
(
13
) and rotate the nut (
24
) counter-clockwise until it is tight. The media
strip will now be fastened to the internal rewind hub (
13
). Rotate the
internal rewind hub (
13
) counter-clockwise to tighten the media strip.
14. Loosen the screw (
19
) using the Allen key (
21
).
Align the locking system (
18
) including the pinch roller (
17
) by sliding it
sidewards. The alignment is correct if the pinch roller (
17
) is placed in the
middle of the label strip.
15. Swing the locking system (
18
) to the rewind assist roller (
20
) and tighten
the screw (
19
).
16. For further informationen about operating in the peel-off mode see
appendix A.
Summary of Contents for THT-BP Precision
