Brady LOCKOUT PRO Enterprise 2.0, User Manual

Page: 12 / 71

- 12 -
Header
Editing the header
To edit the header information, select the Edit Header command from the Edit menu on the Menu Bar. You can also click on the Edit
Header icon in the Toolbar.
You will be presented with the Edit Header dialog box. Fill in the appropriate fields and click the OK button.
To disregard the changes that you’ve made, click the Cancel button.
Images
Inserting images into a procedure
To insert one or two images into the current page of the procedure, select the Edit Images command from the Edit menu on the Menu
Bar. You can also click on the Edit Images icon in the Toolbar.
You will be presented with the Edit Images dialog box. Click the Browse button in either the Image 1 or Image 2 section.
You will be presented with the Open Image dialog box. Select the image file that you would like to insert and click the Open button.
To insert an image title, type it in the Title text box once you have selected an image.
When you have selected the correct images and titles, click the OK button.
Changing an image
To edit the images that are on the current page of the procedure, select the Edit Images command from the Edit menu on the Menu
Bar. You can also click on the Edit Images icon in the Toolbar.
You will be presented with the Edit Images dialog box. Make the appropriate changes and click the OK button.
Removing an image
To remove an image that is on the current page of the procedure, select the Edit Images command from the Edit menu on the Menu
Bar. You can also click on the Edit Images icon in the Toolbar.
You will be presented with the Edit Images dialog box. Click the None button in the appropriate location section to remove the image.
When you have made the appropriate changes, click the OK button.
Modify an image
To modify an image that you wish to use in a procedure, click the Modify Image button in the section where you have previously
selected the image. This will open the image in the Modify Image dialog box. Make the desired changes by clicking the related buttons.
The preview thumbnail images above each button allow you to see the effect of the modification before it is applied to the main image.
To accept the changes that you have made, click the OK button. To cancel all changes and return to the previous dialog, click the
Cancel button. To undo all of the changes that you have made since opening the image in the Modify image box, click the Undo
Changes button.
Energy Sources
Inserting an energy source
To insert an energy source into the current page of the procedure, select the Add Energy Source command from the Edit menu on the
Menu Bar. You can also click on the Add Energy Source icon in the Toolbar.
You will be presented with the Add Energy Source dialog box. Select the energy type for the source that you are entering. The other
information sections will then become active. Make the appropriate selections from the drop-down menus to use the automatically
generated text. To use custom text, type it directly into the desired text box. If you would like to insert an energy source other than the
predefined types, first set it up in the Template Settings area of the program. Last, click on the energy source label located above the
upper right corner of the image preview and drag it over the image to the desired location over the image.
When you have made the appropriate selections, click the OK button to insert the energy source into the procedure. To disregard the
changes that you’ve made, click the Cancel button.
Editing an energy source
To edit an energy source on the current page of the procedure, select the Edit Energy Sources command from the Edit menu on the
Menu Bar. You can also click on the Edit Energy Sources section of the Toolbar.
You will be presented with the Edit Energy Sources dialog box.
Each of the energy sources currently found on the page being viewed will be available from the tabs along the top of the dialog. Make
any necessary modifications to the procedure table steps or the energy source label position over the image. When you have made the
appropriate modifications, click the OK button.
To disregard the changes that you’ve made, click the Cancel button.
Removing an energy source
To remove an energy source on the current page of the procedure, select the Edit Energy Sources command from the Edit menu on the
Menu Bar. You can also click on the Edit Energy Sources icon in the Toolbar.
You will be presented with the Edit Energy Sources dialog box.
Each of the energy sources currently found on the page being viewed will be available from the tabs along the top of the dialog. Switch
to the source that you wish to remove and click the Remove Energy Source # button in the lower right corner of the dialog.