Blank Pair Type Example
•
The “Blank” strip will be formatted as two zones covering the full
printable
length of the strip
(7.5" with a
total
strip length of 7.9" for 110-Block labels; 6.2" with a
total
strip length of 6.6"
for BIX-Block labels).
•
One line of text is allowed on each zone. Pressing
FUNCTION
+
NEXT ZONE
while the cursor is
on the first line (to be printed in the top zone) will move the cursor to Line 2 (which will be
printed in the bottom zone).
•
Horizontal Justification default = Left; Vertical Justification default = Center.
•
You may enter up to a maximum of 75 characters per zone.
Horizontal Serialization
After creating 110-Block or BIX-Block labels, you can perform horizontal serialization of the labels
by doing the following:
Step 1.
Step 2.
Step 3.
Enter the alpha and/or numeric characters to be serialized.
Use the arrows on the keypad
[
◄
] [
►
]
(right/left) to position the cursor under the character
to be serialized.
Press
SERIAL
on the keypad. Horizontal (
HORIZ
) and Backbone (
BBONE
) softkey options
appear:
Step 4.
Step 5.
Press the
HORIZ
softkey.
Enter the desired number of strips (1–9 value only) and press
ENTER
.
(The default number is “1”— the example below shows “5” entered.) Printing begins.
Note:
After printing a series of serial characters, the display screen shows the next
logical character in the serial pattern. (Example: After printing 1 to 5 and print job is
completed, display screen shows
6
.)
User Manual
31