DataComm & T-Block Menu Basics
This section provides basic instructions on using the
DataComm & T-Block Menu
as well as an
overview of the menu selections. Use the menu and related softkeys to perform many of the label
formatting commands.
Note:
See
Chapter 6—
Creating Labels Using the DataComm & T-Block Menu
for more
information. Also see
Appendix B—DataComm & T-Block Menu Tree
.
To access the
DataComm & T-Block Menu
:
Start-Up Display Screen
Upon returning to the start-up display (or by turning the power off
and on), the General ID Menu is highlighted by default. Use the
blue softkeys beneath the up/down arrows to toggle to the
DataComm & T-Block Menu
.
Step 1.
Press
ENTER
to select the DataComm & T-Block Menu.
The Select DataComm Application display screen appears:
Step 2.
Press
NEXT
to advance to the next set of menu options:
At this point, pressing
NEXT
again cycles back to the first set of menu options when the last set
of menu options is reached.
Pressing
CLEAR/ESC
exits the
DataComm & T-Block
menu mode and returns you to the
General ID
display screen.
After returning to the
General ID
display
screen, pressing
FUNCTION
+
MENU
returns you to
the start-up display screen.
User Manual
11