Quick Start Guide
3
Set up your printer
Note: The instructions in this section show the ABC Keypad
version of the IDXPERT
TM
Printer. The same instructions apply if
you are using the Keyboard Layout version.
Step 1. Install the batteries or connect to power
Insert six AA alkaline batteries (not
included)
1. Remove the battery cover located on the
backside of the printer.
2. Install the batteries as shown. See inside
the battery compartment for the battery-
positioning grid.
3. Close the battery compartment.
The printer can also be powered by use of an
optional A/C adaptor.
Step 2. Replace material cartridge
Your printer ships with a cartridge installed. Follow these instructions to
replace the existing cartridge.
1. Turn the locking lever down to unlock the
cartridge.
2. Locate
the
cartridge
release button
on the
backside of the printer and push firmly to
eject cartridge.
3. Remove the existing cartridge.
4. Install the new cartridge as shown.
5. Turn the locking lever up to lock both the
cartridge and printhead.
Thanks to innovative smart-cell technology, the IDXPERT
TM
printer
recognizes the label material and automatically adjusts to it, saving setup
time and effort.
Step 3. Turn the printer ON
Press the
POWER
key.
Locking Lever
Battery
Cover
Summary of Contents for IDXpert Handheld Labeler
Page 10: ...Quick Start Guide 9 Menu Tree...
