Control Panel
42
ASCII Dump Mode
ASCII Dump mode
offers the option of checking incoming control sequences
at the interface when working with direct programming. The incoming
commands at the printer are printed out as text. In addition, a corresponding
error message is printed out immediately after an error occurs.
The printout is started after four lines have been received.
NOTE:
Continuous media is most suitable for this function.
NOTE:
You can adjust the width of the printout down to 2 inches
(50 mm) with the
Width ASCII dump
parameter.
1. Press the
menu
key.
2. Select
Test > ASCII Dump Mode
menu.
3. Press the
key to switch to Monitor mode.
4. Use the
feed
key to call up the last few lines of a label description.
You can cancel the printout with the
cancel
key.
Figure 29, ASCII Dump Mode
