WS-2WMD, WS-3WMT
Installation
4
8/23/2011
Bradley
Corporation
• 215-1706 Rev. A; EN 11-03-001A
(mm)
Installing Optional Horizontal Shroud
Slots for 1/4"
Dia. Screws
(supplied by
installer)
10-24 x 1/2"
Allen Button
Head Screws
Shrouds
Slip
Ring
Bracket
#10-24
Holes
A
Position Bracket and Slip Ring on wall and
secure with 1/4" screws (provided by installer).
B
Position Shroud over the bracket and secure with
screws provided.
C
Using shroud as guides, drill and tap #10-24
holes in Slip Ring. Secure Shroud to Slip Ring.
Cleaning Stainless Steel
Material Description
: Stainless steel is extremely durable, and maintenance is simple and inexpensive. Proper care, particularly under corrosive
conditions, is essential. Always start with the simplest solution and work your way toward the more complicated.
Routine cleaning
: Daily or as often as needed use a solution of warm water and soap, detergent, or ammonia. Apply the cleaning solution per the
manufactures instructions and always use a soft cloth or sponge to avoid damaging the fi nish.
Stubborn Stains
: To remove stains from stainless steel, use a stainless steel cleaner and polish such as Ball
®
stainless steel cleaner or a soft
abrasive. Always follow the manufactures instructions and apply in the same direction as the polish lines.
Special Situations for Material
Fingerprints and Smears
: To remove fi ngerprints or smears use a high quality stainless steel cleaner and polish in accordance with the
manufactures instructions. Many of these products leave a protective coating that helps prevent future smears and fi ngerprints.
Grease and Oil
: To remove grease and oil, use a quality commercial detergent or caustic cleaner. Apply in accordance to the manufactures
instructions and in the direction of the polish lines.
Precautions
: Avoid prolonged contact with chlorides (bleaches, salts), bromides (sanitizing agents), thiocyanates (pesticides, photography chemicals,
and some foods), and iodides on stainless steel equipment, especially if acid conditions exist.
The appearance of rust streaks on stainless steel leads to the belief that the stainless steel is rusting. Look for the actual source of the rust in some
iron or steel particles which may be touching, but not actually a part of the stainless steel structure.
Brand Names
: Use of brand names is intended only to indicate a type of cleaner. This does not constitute an endorsement, nor does the omission of any brand name cleaner imply its
inadequacy. Many products named are regional in distribution, and can be found in local supermarkets, department and hardware stores, or through your cleaning service. It is emphasized
that all products should be used in strict accordance with package instructions.
Never use ordinary steel wool or steel brushes on stainless steel.
Always use stainless steel wool or stainless steel brushes.
Do not permit salty solutions to dry and evaporate on stainless steel.
Strongly acidic or caustic cleaners may attack the steel causing a
reddish fi lm to appear. The use of these cleaners should be avoided.
