Installation
WS-2WMD, WS-3WMT
Bradley Corporation
• 215-1706 Rev. A; EN 11-03-001A
8/23/2011
3
Mounting
Bracket
Top Cover
Bottom
Cover
Mounting
Bracket
Supply
Knockouts
X 8
X 8
A
Remove top and bottom covers.
B
Measure from top of unit to tip of showerhead.
Subtract 2" and add the total to the desired
mounting height (see page 2). Mark the wall
with level horizontal line.
A
Position Bracket on top of shower and secure
to wall with 1/4" screws (provided by installer).
B
Position Slip Ring on top of shower against
ceiling and secure to wall with 1/4" screws
(provided by installer).
C
Position Shroud and secure to lower bracket with
screws provided. Using holes on top of shroud
as guides, drill and tap #10-24 holes in Slip Ring.
Secure Shroud to Slip Ring.
D
Connect water supply to copper tubes inside the
shower unit. Turn on water to your shower and
check for leaks. Attach top and bottom covers.
C
Drill 1/4" holes on marked line and attach
mounting brackets to wall using suitable hardware.
Hang unit on brackets. Fasten to wall at the four
anchor holes, using suitable hardware.
1
Install Shower
Supplies may be brought in from
back of shower unit or through
knock- outs located on top of
shower unit.
Installing Optional Vertical Shroud
(mm)
Ceiling
Slip Ring
Shroud
Slots for 1/4"
Dia. Screws
(supplied by
installer)
10-24 x 1/2"
Allen Button
Head Screws
1" (25)
4" (102)
6-1/2"
(165)
6-1/2"
(165)
Bracket
Top of
Wall Saver
Shower
