TDB3104, WF3204
Installation
10
1/15/2013
Bradley
• 215-1078 Rev. T; ECN 12-00-004
A
Install 1/2" supply tubing in the sprayhead
using the male connector.
•
Using a sharp razor, cut tubing squarely
and remove any burrs. DO NOT pinch or
crush end of tubing.
•
Loosen nut on fitting. Moisten end of
tube and push into fitting until it is firmly
seated. Tighten nut to secure tube
to fitting (make sure nut is securely
tightened).
•
If connector leaks, reseat tubing. If
leaking persists, replace male connector,
or call your Bradley representative for
assistance.
Sprayhead
Tubing
Male Tube
Connector
Nut
Tubing
4
Connect Supply Tubing to Sprayhead