Installation
SN2013/IR, SN2033/IR
Bradley Corporation
• 215-923 Rev. H; EN 10-00-015
7-12-2010
5
Type B
Centrally rising vent -
passes through center of unit
(P-Trap furnished).
Type O
Off-line vent (P-Trap
supplied by Installer.)
Type A
Off-line vent (P-Trap
supplied by Installer.)
Type H
Centrally rising vent -
passes through center of unit
(P-Trap furnished).
Floor-mounted units: UPC and IPC restrict the vertical
distance from the fi xture outlet to the trap weir to not more
than 24" (610). Check state and local codes for variances.
Supplies from Above
Supplies from Below or Through Wall
Rough-In Dimensions for Supplies and Drain
Notes
Maximum flow rate required to washfountain is 1.5 GPM. Size supply lines accordingly.
Supplies from Below: Stub up 2-1/2" (64).
Supplies from Above: Supplies must be located on centers of dimensions shown to pass
through washfountain shroud and sprayhead.
Drain through floor: Stub up 3" (76).
Top View
Top View
1/2" Supply: Nominal Copper Tube
1/2" Supply Through Wall (Optional): Nominal Copper Tube
1-1/2" NPT Drain
Key
When running supplies and drain through wall, use same horizontal measurements as shown in Top View.
Position openings above the fi nished fl oor, at the following dimensions (to center):
Drain:
Standard Height: 19-1/4" (305)
Juvenile Height: 15-1/4" (387)
Supplies: Standard Height: 12" (305)
Juvenile Height: 8" (203)
(mm)
11-3/4"
(298)
11-3/4"
(298)
18-7/16"
(468)
18-7/16"
(468)
10-5/16"
(262)
10-5/16"
(262)
11-1/2"
(292)
11-1/2"
(292)
12-1/16"
(306)
12-1/16"
(306)
2-9/16"
(65)
6-3/4"
(298)
6-3/4"
(298)
7-15/16"
(202)
11-3/4"
(298)
11-3/4"
(298)
Optional Wall
DRAIN
Optional Wall
DRAIN
H
H
C
C
