LC840
Installation
6
10/24/08
Bradley
Corporation
• 215-1599 Rev. B; EN 07-1004C
6
Push Button Flush Valve
7
Countertop
Terreon
®
Top:
Set the lavatory
top in place so the back and wall
sides are flush with the edge of the
cabinet. Do not secure the top with
silicone caulk at this time. The top
will be secured after installation is
complete and the unit is tested for
leaks.
Laminate Top:
Reattach the top
with screws originally provided
when unit was shipped.
A
8
Faucet, Optional Foot Valve and Supplies
Before connecting supplies, install the
faucet per manufacturer's instructions.
Connect one end of the
supply hose to the supply
shank on the faucet.
Connect the other end of the
hose to the foot valve outlet
connection.
A
Connect the hot and cold
water supply piping to the
1/2" NPT inlet connections
on the foot valve.
B
Connect the P-trap to the sink’s
1-1/4" or 1-1/2" O.D. drain pipe
and to the 1-1/2" O.D. tailpiece
from the wall.
IMPORTANT: Laminate top
option requires 1-1/4" to 1-1/2"
adapter for drain connection.
C
Turn on the water supplies
and check for leaks and
adequate water fl ow.
Activate the faucet,
bedpan washer and fl ush
valve seeral times to purge
air from the supply lines.
D
To access the fl ush
valve, remove the
seat back cushion.
Connect the flush valve water
supply piping (supplied by
installer) to the flush valve’s
1" NPT inlet.
A
Insert the tube from the “O” outlet
on the flush valve casting to the
“O” on the flush button housing.
Insert the tube from the “L” outlet
on the flush valve casting to the
“L” on the flush button housing.
B
