Installation
FL-3H, FL-3L
Bradley Corporation
• 215-1513 Rev. H; ECM 11-08-011
2/15/2012
11
H
C
A
Loosen the cap screw
about ¼" (4–6 turns)
and lift up the cover (do
not remove).
B
Using the cover, turn the cartridge
gently until desired water temperature
is reached. Do not turn past stops as
this may damage the unit. Push the
cover down and tighten the screw.
This valve is NOT factory preset. Upon installation, the temperature of this
valve must be checked and adjusted to ensure delivery of a safe water
temperature. Water in excess of 110°F (43°C) may cause scalding.
6
Adjust the Temperature
7
End Outlet and Continuous Waste
FL-3L is shown
FL-3H is opposite
Offset Lav Strainer
Tee End Outlet
P-trap
Waste Arm
8" ref.
(203mm)
Waste Arm
Front View
10¾" ref.
(273mm)
4" ref.
(102mm)
