Installation
7910 Single Valve Recessed Hose Box
Bradley Corporation
• 215-1699 Rev. B; EN 10-07-009
1/26/2011
3
2
Connect Supply
Optional Left Supply Confi guration
A
Connect 1/2
"
NPT supply.
(Side connection shown.)
C
Activate supply and test for leaks.
Adjust stop point if necessary.
Re-attach door.
B
Tighten vacuum breaker onto hose
bibb and secure by tightening screw.
A
Remove door. After carefully noting
configuration of fittings, remove
vacuum breaker from hose bibb.
B
Remove stand-off bracket, hose bibb and other
components from inner box. Disassemble fittings.
C
Rotate cabinet 180
˚
so outlet holes are on the left.
Re-install
valve and stand-off bracket, being careful to align screwdriver
stop with stop hole in cabinet. Proceed to Step 1 on page 2.
Left supply confi guration is the opposite of standard right supply confi guration.
Thoroughly clean threads and seal with plumber's
tape or Perma-Lok (or equivalent).
Vacuum breaker's break-away screw (or
set screw) is not tightened at factory.
Stand-Off
Bracket
Hose Bibb
Vacuum
Breaker
Screwdriver
Stop
Screwdriver
Stop Hole
Outlet
Holes
Elbow (remove for top
connection)
