manualshive.com logo in svg

Bradley 6-3100, Installation And Maintenance Manual, Page: 8 / 19

Share
Download
Bradley 6-3100 Installation And Maintenance Manual Download Page 8

Verge

®

 Multi-Feed Soap Tank 

Installation

8

 

2/12/2020

 Bradley 

• P20-225 Rev. A: ECO 19-15-015A

Remove the Fill Port Hub Assembly

2 3

/8

MI

NIM

UM

FR

OM

 W

ALL

2-3/8" Dia.

Mounting Hole

Soap Overflow 

Sensor (Black)

Lower Soap

Tank Bracket

Thumb

Screws

Thumb

Screws

Low Soap Sensor

Soap Supply Valve

Soap Tank

Mounting

Bracket

Soap

Tank

Lower Soap 

Tank Bracket

Remove the four thumb screws at the bottom of 
the soap tank mounting brackets, and slide the 
lower soap tank bracket forward.

Slide the soap tank downward from the bracket 
assembly to remove the soap tank from the 
mounting bracket.

B

C

Carefully disconnect the soap sensors and the 
LED connector.

A

LED Connector 

(White)

Power Supply 

Connection

Low Soap Level 

Sensor (Red)

Multi-Feed Soap Tank Assembly Mounting

4

Before mounting the soap tank assembly, 
drill a 2-3/8

"

 diameter hole through the deck 

that is positioned 2-3/8

"

 from the adjacent 

back wall. This will ensure proper clearance 
of the soap tank.

Summary of Contents for 6-3100




















Reviews:

No comments