Verge
®
Multi-Feed Soap Tank
Installation
6
2/12/2020
Bradley
• P20-225 Rev. A: ECO 19-15-015A
Control Box Mounting
2
Use a level to ensure the control box
assembly is level, and then mark four
mounting hole locations on the wall using
a pencil.
B
Drill the four 1/4" diameter mounting
holes into the wall or surface, using a drill
and appropriate drill bit.
C
Fastener
Anchors
Mounting
Screws
Mounting Holes
x2
1/4
"
Dia.
Mounting
Holes
Locate the mounting position for the
control box assembly.
A
2
¹⁄₂
"
Offset (max) Right or
Left From Center
Use the supplied mounting screws (or
suitable mounting hardware) to attach the
control box assembly in place.
D
Top mounting holes need to be
mounted between 4
¹⁄₂
"
& 9
¹⁄₂
"
from
the top of the deck, and 2
¹⁄₂
"
right or
left of center of shank.
Appropriate fastener anchors and
mounting hardware must be used
when mounting the control box
assembly in the desired surface.
4
¹⁄₂
" (114)
9
¹⁄₂
" (241)
10
½
"
(267)
3
¹⁄₈
"
(79)
Shank