Menu Functions
Gain
Adjusts the Gain from -3dB to +18dB in 3dB steps.
Red Gain
Requires White Balance to be set to Manual
Blue Gain
Requires White Balance to be set to Manual
Detail
Adjusts the detail level from 0 to 15. Normal setting is around 5.
Shutter Speed
Adjusts the shutter speed from 1/2sec to 1/10,000 sec.
White Balance
Includes BARS if available
Gamma
There are 3 levels of gamma available.
Master Pedestal
Not available for the BE_HD10
Output Standard
SD or HD in 8 different standards
Iris Range
Set to 18 for BE_HD10 or 255 for broadcast lenses
Pan Speed
High or Low
Tilt Speed
High or Low
Reverse Pan/Tilt
Cycles through the 4 direction combinations
Zoom Reverse
Reverses the direction of the zoom control
Focus Reverse
Reverses the direction of the focus control
Head Select
Selects control of another remote head 1-99
Change Head ID
Re-assigns the ID of the current head
Reset ALL to #1
Re-sets all connected heads to ID #1
Infra Red Mode
Toggles the IR mode on or Off
Power Up Memory
Set/Clear. This feature can only be used with a
Protocol Converter
.
Setting the memory will store the current Zoom and Focus positions in
the
Protocol Converter
and reset them every time it powers up.
Store Position
Stores the current position head and camera as a preset position 1-99
Go To Position
Recalls the previously set positions 1-99
Digital Zoom
Digital Zoom On/Off
Remote Relay
Commands a remote relay On/Off
Auto Focus
Auto Focus On/Off
Zoom Limit
Sets the current zoom position as the zoom in limit.
Zeroing the controls
Should the Pan, Tilt or Zoom controls appear to be off-centre (sometimes this will induce drift) the
controls can be electrically re-centred.
Whilst the AUX LED is flashing at power-up, push the AUX button.
Specifications
Power:
12v, 200mA
Dimensions:
W.165mm, D.90mm, H.35mm
Output:
RS485 or RS232c
Max Cable Length:
1km
(with RS485 device or
protocol converter)
David Bradley Engineering Ltd - www.bradeng.com
