8
Installations
Outdoor kit – 6 720 811 755 (2014/05)
7.2
Installing outdoor vent cap on the appliance
▶ 1. Attach the supports (A) to the appliance by fastening
with the four provided screws, as shown in Fig. 13.
Fig. 13
Before mounting the outdoor kit in the appliance:
▶ Position the outdoor vent cap on the top of the appliance,
as shown in Fig. 14.
Fig. 14
▶ Attach the outdoor vent cap to the appliance by fastening
the two provided screws and washers, see Fig. 15.
Fig. 15
Installation of frame in the heater
To install the protection grill in the heater;
▶ Tilt the frame on one direction, as showed in Fig. 16.
▶ Push the frame to fit the Outdoor vent cap.
Fig. 16
WARNING:
▶ The control panel shield must always
remain closed, except when making
adjustments, to prevent damage to
heater from weather.
A
6720644956-03.1V
A
6720645551-01.1V
NOTE: Once this kit is installed, the outdoor
vent cap will need to be removed before
removing the front cover.
6720645551-04.1V
1
2
Summary of Contents for RTG 199HE
Page 12: ......
