manualshive.com logo in svg

BPS C-100, User Manual

Share
Download
BPS C-100 User Manual Download Page 21

17

P

owering 

Y

our 

P

AP 

D

evice

RESMED S8 SERIES & OTHER OLDER RESMED DEVICES

ResMed S8 Series or other older ResMed PAP devices require the use of
ResMed’s DC Power Converter or a power inverter in conjunction with the
Battery Pack. 

Do not connect the Battery Pack directly to any ResMed

device as doing so will damage the PAP device.

CONNECTION USING RESMED DC POWER CONVERTER

Connect the DC Input Cord to the DC Out Jack of the Battery Pack.

Note:

 

If you are using the Battery Pack in the dual configuration,

connect the DC Power Pigtail Cord to the DC Out Jack of both Battery
Packs and connect the DC Power Pigtail Cord to the DC Input Cord.

Connect the cigarette lighter plug end of the ResMed DC Power
Converter to the DC Input Cord.

Connect the output cable of the ResMed DC Power Converter to the
DC input port of the PAP device.

Press the ON/OFF button on the PAP device and the device should
start functioning.

PAP DC Input Port

DC Out Jack

DC Input Cord

ResMed DC

Power Converter

Summary of Contents for C-100





























Reviews:

No comments

Brands by name

Popular brands

Load more brands